Craftsman 137.212210 Miter Saw Manual

The Craftsman 137.212210 is a powerful miter saw designed for precision cutting of wood and other materials. It features a 15-amp motor, adjustable miter angles, and a laser guide for enhanced accuracy. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 15-amp motor, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
15-Amp Motor	Provides powerful cutting performance
Adjustable Miter Angles	Allows for precise angle cuts
Laser Guide	Helps ensure accurate cuts
Dust Collection Port	Minimizes debris during operation
Ergonomic Handle	Designed for comfort and control

Installation

Unpack the saw and inspect for any damage. Place it on a stable work surface.

Ensure the saw is unplugged before installation.
Attach the dust collection bag if available.
Adjust the miter and bevel settings as needed.
Plug into a power source.

WARNING! Always use safety gear when operating the saw.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Set the miter angle using the adjustment knob.
Check the blade alignment and adjust if necessary.
Test the laser guide for accuracy.
Ensure all safety features are functioning.

CAUTION! Always keep hands clear of the blade.

Specifications

Motor Power: 15 Amps.
Blade Size: 10 inches.
Miter Angle Range: 0° to 45°.
Bevel Angle Range: 0° to 45°.
Weight: 35 lbs.
Dust Collection: Yes, with included bag.
Laser Guide: Yes.

Controls and Settings

Access the miter and bevel controls on the front panel. The laser guide can be activated via a switch located near the handle.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

This miter saw does not require external devices for operation. Ensure the power source is compatible.

Use a grounded outlet for safety.
Do not use extension cords unless necessary.

Tip: Always check the power supply before use.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel angles as needed.
Place the material securely against the fence.
Power on the saw and allow the blade to reach full speed.
Make the cut, keeping hands clear of the blade.
Power off the saw after use.

WARNING! Always wear safety goggles and hearing protection.

Safety Features

The saw includes several safety features such as a blade guard, electric brake, and a safety switch to prevent accidental starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior. Avoid using liquids.

CAUTION! Do not attempt to clean while the saw is plugged in.

Regulatory Information

This product complies with all applicable safety standards. For support, visit www.craftsman.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Laser not working	Battery issue	Replace the battery in the laser guide.
Inaccurate cuts	Misalignment	Check and adjust the blade alignment.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: If issues persist, consult customer service.

Service: For assistance, contact 1-800-4MY-HOME.